简单使用 Mvc 内置的 Ioc
本文基于 .NET Core 2.0。
鉴于网上的文章理论较多,鄙人不才,想整理一份 Hello World(Demo)版的文章。
目录
- 场景一:简单类的使用
- 场景二:包含接口类的使用
- 场景三:涉及引用类库的使用
场景一:简单类的使用
类 DemoService.cs:
- public class DemoService
- {
- public string Test()
- {
- return Guid.NewGuid().ToString();
- }
- }
复制代码
控制器 DemoController.cs:
- public class DemoController : Controller
- {
- private readonly DemoService _demoService;
- public DemoController(DemoService demoService)
- {
- _demoService = demoService;
- }
- public IActionResult Index()
- {
- return Json(_demoService.Test());
- }
- }
复制代码
需要先在 Startup.cs 下的 ConfigureServices() 方法中进行注册才能使用,这里提供了三种方法,可以选择自己喜欢的方式进行注册。
- //方法一
- services.AddSingleton(typeof(DemoService), new DemoService());
- //方法二
- services.AddSingleton(typeof(DemoService));
- //方法三
- services.AddSingleton<DemoService>();
复制代码

执行输出结果,正常:

IOC 的容器目前有三种生命周期 Transient、Scoped 和 Singleton,使用方式大致相同,具体差异不在这里进行叙述:
- //范例
- services.AddTransient(typeof(DemoService));<br />
- services.AddScoped<DemoService>();
复制代码
场景二:包含接口类的使用
接口 IDemo2Service.cs:
- public interface IDemo2Service
- {
- string Test();
- }
复制代码
接口实现 Demo2Service.cs:
- public class Demo2Service : IDemo2Service
- {
- public string Test()
- {
- return Guid.NewGuid().ToString();
- }
- }
复制代码
控制器 Demo2Controller.cs:
- public class Demo2Controller : Controller
- {
- private readonly IDemo2Service _demoService;
- public Demo2Controller(IDemo2Service demoService)
- {
- _demoService = demoService;
- }
- public IActionResult Index()
- {
- return Json(_demoService.Test());
- }
- }
复制代码
目前需要在类 Startup.cs 中的 ConfigureServices() 方法内新增的注册方法如下(可选其一):
- //方法一
- services.AddSingleton(typeof(IDemo2Service), new Demo2Service());
- //方法二
- services.AddSingleton(typeof(IDemo2Service), typeof(Demo2Service));
- //方法三
- services.AddSingleton<IDemo2Service, Demo2Service>();
复制代码

输出结果正常:

场景三:涉及引用类库的使用
我们先新增一个用于标识作用的接口 IServiceSupport.cs,该接口没有包含方法,只是一个标识作用,有点类似 DDD 的聚合根接口 IAggregateRoot:
- public interface IServiceSupport
- {
- }
复制代码
接口 IDemo3Service.cs
- public interface IDemo3Service
- {
- string Test();
- }
复制代码
接口实现 Demo3Service.cs
- public class Demo3Service : IDemo3Service
- {
- public string Test()
- {
- return Guid.NewGuid().ToString();
- }
- }
复制代码
这次我们统一编写一个方法将该类库下的所有接口和实现进行注册:
- private static void AddSingletonServices(IServiceCollection services)
- {
- var asm = Assembly.Load(new AssemblyName("IocCoreDemo.Services"));
- var serviceTypes = asm.GetTypes()
- .Where(x => typeof(IServiceSupport).IsAssignableFrom(x) && !x.GetTypeInfo().IsAbstract);
- foreach (var serviceType in serviceTypes)
- {
- foreach (var serviceInterface in serviceType.GetInterfaces())
- {
- services.AddSingleton(serviceInterface, serviceType);
- }
- }
- }
复制代码
因为使用了反射,所以需要 using System.Reflection;
这次我们在 Startup.cs 类中添加和修改的方法如图所示:

Startup.cs 类中使用的有效命名空间如下:
- using IocCoreDemo.Services;
- using Microsoft.AspNetCore.Builder;
- using Microsoft.AspNetCore.Hosting;
- using Microsoft.Extensions.Configuration;
- using Microsoft.Extensions.DependencyInjection;
- using System.Linq;
- using System.Reflection;
复制代码
如果注入失败,执行结果便会如图所示:

为什么会出现上图的情况呢?因为小编忘记把接口 IDemo3Service 继承自接口 IServiceSupport 了,接下来我们只需要做出一个继承的编写操作即可:

再次执行启动,结果便如你所料:

原文地址:http://www.cnblogs.com/liqingwen/p/8571366.html
相关的文章:
《[.Net Core] 简单读取 json 配置文件》
《[.Net Core] 简单使用 Mvc 内置的 Ioc》
《[.Net Core] 简单使用 Mvc 内置的 Ioc(续)》 |